Mikrotik PXE boot DHCP options 66, 67, RouterOS, Cobbler

I have created cobbler server on my lan.
Cobbler configuration file is /etc/cobbler/settings and it already says:
next_server: 192.168.88.61
If you want to configure to boot from PXE using Mikrotik router no need to set up option 66 and 67! Here is real working configuration:

Make sure you delete everything under options:
Go to your one single dhcp setup page:
Write down your cobbler ip address in Next Server and NTP Server field.
Boot File Name set to pxelinux.0
You do not have to restart anything.
Just press OK and one second later you can boot with PXE.
Byat

1 comment:

  1. UnknownJune 02, 2016

    This works for FOG too by the way you just have to use "undionly.kpxe" instead of "pxelinux.0"

    ReplyDelete